$IPTABLES -A icmp_packets -p ICMP -s 0/0 –icmp-type 8 -j ACCEPT

$IPTABLES -A icmp_packets -p ICMP -s 0/0 –icmp-type 11 -j ACCEPT

#

# 4.1.4 INPUT chain

#

#

# Bad TCP packets we don't want.

#

$IPTABLES -A INPUT -p tcp -j bad_tcp_packets

#

# Rules for special networks not part of the Internet

#

$IPTABLES -A INPUT -p ALL -i $LO_IFACE -s $LO_IP -j ACCEPT

$IPTABLES -A INPUT -p ALL -i $LO_IFACE -s $LAN_IP -j ACCEPT

$IPTABLES -A INPUT -p ALL -i $LO_IFACE -s $INET_IP -j ACCEPT

#

# Rules for incoming packets from anywhere.

#

$IPTABLES -A INPUT -p ALL -d $INET_IP -m state –state ESTABLISHED,RELATED \

–j ACCEPT

$IPTABLES -A INPUT -p TCP -j tcp_packets

$IPTABLES -A INPUT -p UDP -j udp_packets

$IPTABLES -A INPUT -p ICMP -j icmp_packets

#

# If you have a Microsoft Network on the outside of your firewall, you may

# also get flooded by Multicasts. We drop them so we do not get flooded by

# logs

#

#$IPTABLES -A INPUT -i $INET_IFACE -d 224.0.0.0/8 -j DROP

#

# Log weird packets that don't match the above.

#

$IPTABLES -A INPUT -m limit –limit 3/minute –limit-burst 3 -j LOG \

–log-level DEBUG –log-prefix "IPT INPUT packet died: "

#

# 4.1.5 FORWARD chain

#

#

# Bad TCP packets we don't want

#

$IPTABLES -A FORWARD -p tcp -j bad_tcp_packets

#

# Accept the packets we actually want to forward

#

$IPTABLES -A FORWARD -p tcp –dport 21 -i $LAN_IFACE -j ACCEPT

$IPTABLES -A FORWARD -p tcp –dport 80 -i $LAN_IFACE -j ACCEPT

$IPTABLES -A FORWARD -p tcp –dport 110 -i $LAN_IFACE -j ACCEPT

$IPTABLES -A FORWARD -m state –state ESTABLISHED,RELATED -j ACCEPT

#

# Log weird packets that don't match the above.

#

$IPTABLES -A FORWARD -m limit –limit 3/minute –limit-burst 3 -j LOG \

–log-level DEBUG –log-prefix "IPT FORWARD packet died: "

#

# 4.1.6 OUTPUT chain

#

#

# Bad TCP packets we don't want.

#

$IPTABLES -A OUTPUT -p tcp -j bad_tcp_packets

#

# Special OUTPUT rules to decide which IP's to allow.

#

$IPTABLES -A OUTPUT -p ALL -s $LO_IP -j ACCEPT

$IPTABLES -A OUTPUT -p ALL -s $LAN_IP -j ACCEPT

$IPTABLES -A OUTPUT -p ALL -s $INET_IP -j ACCEPT

#

# Log weird packets that don't match the above.

#

$IPTABLES -A OUTPUT -m limit –limit 3/minute –limit-burst 3 -j LOG \

–log-level DEBUG –log-prefix "IPT OUTPUT packet died: "

######

# 4.2 nat table

#

#

# 4.2.1 Set policies

#

#

# 4.2.2 Create user specified chains

#

#

# 4.2.3 Create content in user specified chains

#

#

# 4.2.4 PREROUTING chain

#

#

# 4.2.5 POSTROUTING chain

#

#

# Enable simple IP Forwarding and Network Address Translation

#

$IPTABLES -t nat -A POSTROUTING -o $INET_IFACE -j SNAT –to-source $INET_IP

#

# 4.2.6 OUTPUT chain

#

######

# 4.3 mangle table

#

#

# 4.3.1 Set policies

#

#

# 4.3.2 Create user specified chains

#

#

# 4.3.3 Create content in user specified chains

#

#

# 4.3.4 PREROUTING chain

#

#

# 4.3.5 INPUT chain

#

#

# 4.3.6 FORWARD chain

#